MP - Optic Cut Service

Services offered on the MP Model Slides this includes 9/40/45 models

• Single Color Cerakote is required with this service and black is free

• This service includes the disassemble and reassembly of your slide.

• If you are using a smaller optic like a holosun 407K or similar optic then factory height sights usually work with this optic as a very low type of setup. Taller sight are recommended to get a complete 1/3 cowitness. When using a larger optic like a RMR the rear sight is removed and can be added to the front by selecting “yes” on the dovetail options, this is only offered on the larger model optics. Suppressor height sights are required to work with a large sized optic if you are wanting a 1/3 type of setup.

• If you are using any of the following optics the optic and screws must be provided at the time of work (Holosun EPS/EPS Carry/Viper/Venom/Delta Point Pro/RomeoZero)

• If you are using any of the following optics they must be cut to the rear of the slide removing the factory rear ion sight. Make sure to Select “Yes” on dovetail if we are relocating the rear iron sight to the front of the optic (Trijicon RMR/SRO/Holosun 407a/407C/507C/508T/Vortex Viper/Vortex Venom/Leupold Delta Point Pro)

• Front Alignment/Support posts are only offered on RMR/Holosun 507c/508T cuts and the optic must be provided at the time of work.

**This service is not offered on the EZ model slides.

** We will not install XS Sights. If you provide these, we will bag your factory sights and ship back the new sights. This will allow you to install them without removing the factory sights.

• We recommend you review current samples of the colors we provide. These will be the exact colors you can select during checkout. Those samples can be found here>>> COLOR SAMPLES <<<

• Orders that are only Optic Cut and Coloring are a 2-3 business day turn around time. Additional services added to an order will extend this time.