No slide, Optic or iron sights are included with this service order. NCEngravers will not be responsible for sight damage during disassembly/reassembly. Sig sights are tight and can sometimes be damaged during the removal/reinstall process. If we damage the sight(s) they will be bagged and not reinstalled. We will not replace or reimburse for these damaged sights as this is a common problem during the removal/reinstall process.

If you are sending in a aftermarket slide please email us to confirm the work can be done.

This service is offered on your provided factory P365 and P365X model slide

• Single Color Cerakote is required with this service and BLACK is free

• Optic and screws are required at the time of work. If you are using an optic not on the supported list, you must reach out to us and ask if it can be done. If you ship an optic model and we need to cancel an order because we don’t offer it, then that will be cancelled per our policy

• The optic cut service is available on the Sig P365 model slide. Optic Cuts come in 2 different configurations. The optic cut can remove the rear dovetail or be cut in front of the factory dovetail. During checkout you will be asked about the optic location. Upgraded taller sights are recommended for a cowitness setup.

• RMRCC optics must be cut in front of the rear iron sight (this optic must be provided at the time of work)

• This service includes the disassemble and reassembly of your slide, so send the slide fully assembled minus the barrel and spring

• If you are wanting to upgrade to suppressor sights, we recommend these as they work best (Sig - SOX10009 or SIG-180-345-332-YGZG)

• If you select “Yes” to the dovetail option this is a front of optic Glock or Sig Dovetail cut. The iron sight must be provided at the time of work.

• If you do a front of optic glock style dovetail we recommend using AmeriGlo GL-425 (this is a all black rear sight) as it works best with the factory front sight. Other Glock Iron sights will work that are similar in height,

• If you have a P365X slide and want a front of optic Sig dovetail with the lowest cowitness, you will want to use Ameriglo SG-616 iron sights. If you would like a complete lower 1/3 cowitness you will want to use Ameriglo SG-181

• This service is not offered on the 380 model

• We recommend you review current samples of the colors we provide. These will be the exact colors you can select during checkout. Those samples can be found here>>> COLOR SAMPLES <<<

• You must select Yes/No on all options to generate a cost