No slide, Optic or iron sights are included with this service order. NCEngravers will not be responsible for sight damage during disassembly/reassembly. Sig sights are tight and can sometimes be damaged during the removal/reinstall process. If we damage the sight(s) they will be bagged and not reinstalled. We will not replace or reimburse for these damaged sights as this is a common problem during the removal/reinstall process.

If you are sending in a aftermarket slide please email us to confirm the work can be done.

Single Color Cerakote is required with this service and BLACK is free
Optic and screws are required at the time of work. If you are using an optic not on the supported list, you must reach out to us and ask if it can be done. If you ship an optic model and we need to cancel an order because we don’t offer it, then that will be cancelled per our policy
The optic cut service is available on the Sig P365 model slide. Optic Cuts come in 2 different configurations. The optic cut can remove the rear dovetail or be cut in front of the factory dovetail. During checkout you will be asked about the optic location. Upgraded taller sights are recommended for a cowitness setup.
RMRCC optics must be cut in front of the rear iron sight (this optic must be provided at the time of work)
This service includes the disassemble and reassembly of your slide, so send the slide fully assembled minus the barrel and spring
If you are wanting to upgrade to suppressor sights, we recommend these as they work best (Sig - SOX10009 or SIG-180-345-332-YGZG)
Side windows are not offered on the 380 model. Raptor Cuts and Cobra Nose are only offered
We recommend you review current samples of the colors we provide. These will be the exact colors you can select during checkout. Those samples can be found here>>> COLOR SAMPLES <<<
To better understand each service please watch our service video on the P365. > > > Video < < <
You must select Yes/No on all options to generate a cost