No slide, Optic or iron sights are included with this service order. NCEngravers will not be responsible for sight damage during disassembly/reassembly. SAR sights are tight and often glued in from the factory with red Thread locker. Usually, they are damaged during the removal/reinstall process. If we damage the sight(s) they will be bagged and not reinstalled. We will not replace or reimburse for these damaged sights as this is a common problem during the removal/reinstall process. We recommend you provide new sights at the time of work.

• Single Color Cerakote is required with this service and black is free

• When adding an optic to this model slide the optic is cut to the rear and the factory dovetail is removed. You do have the option of a Glock Style Dovetail which would be loacted in front of the optic. make sure you select “Yes” to the dovetail option when adding to the cart

• If you are doing a new Front of optic iron sight it is required at the time of work.

• We recommend Ameriglo GL-329 or GL-429 model sights but any standard glock suppressor sight set should work (if you provide them we will install them)

• This service includes the disassemble and reassembly of your slide.

• We recommend you review current samples of the colors we provide. These will be the exact colors you can select during checkout. Those samples can be found here>>> COLOR SAMPLES <<<

• Optic and screws are required at the time of work. If you are using an optic not on the supported list, you must reach out to us and ask if it can be done. If you ship an optic model and we need to cancel an order because we don’t offer it, then that will be cancelled per our policy.

• To better understand this service we recommend you watch this > > > Video < < <

All options must be selected to generate a total cost