No slide, Optic or iron sights are included with this service order. NCEngravers will not be responsible for sight damage during disassembly/reassembly. Some HK sights are tight/locked in with thread locker and can sometimes be damaged during the removal/reinstall process. If we damage the sight(s) they will be bagged and not reinstalled. We will not replace or reimburse for these damaged sights as this is a common problem during the removal/reinstall process.

This service is for all VP9 that includes the 9/40 and SK models.

• Single Color Cerakote is required with this service and black is free

• When adding to the cart you will be asked what optic model we are cutting for. All optic must be cut between the barrel and Rear iron sight.

• When adding an optic cut to your slide smaller optics will be mounted low enough to work with factory height sights. Larger optics will need suppressor sights for a cowitness setup.

• This service includes the disassemble and reassembly of your slide.

• We recommend you review current samples of the colors we provide. These will be the exact colors you can select during checkout. Those samples can be found here>>> COLOR SAMPLES <<<

• Optic and screws are required at the time of work. If you are using an optic not on the supported list, you must reach out to us and ask if it can be done. If you ship an optic model and we need to cancel an order because we don’t offer it, then that will be cancelled per our policy

To better understand this service we would recommend you watch our youtube video —> HK - Raptor Cut Service

All options must be selected to generate a total cost