No slide, Optic or iron sights are included with this service order. NCEngravers will not be responsible for sight damage during disassembly/reassembly. Some aftermarket Glock sights are tight/locked in with thread locker and can sometimes be damaged during the removal/reinstall process. If we damage the sight(s) they will be bagged and not reinstalled. We will not replace or reimburse for these damaged sights as this is a common problem during the removal/reinstall process.

• Cerakote is a required service

• Not all, but some model optics are cut to the rear of the slide and require the rear iron sight removed. If you would like to add a front of optic iron sight to the project, you must select “Dovetail” as “Yes” when processing the order

• If we are moving the rear iron sight to front of the optic, that iron sight must be provided at the time of work. If you do not provide an iron sight, we will use the factory sight but will not guarantee aftermarket sight will work. The market offers a wide selection of iron sights, and we do recommend you provide the sight you plan to use at the time of work for the best setup.

• This service includes the disassemble and reassembly of your slide.

• When adding an optic cut to your slide, taller sight will be required for a cowitness setup. Suppressor height will be required for bigger optics and slightly taller than factory will be required for micro dot optic.

• We do not offer a RMR optic plate cut for a 509T or a direct cut. Please use the MOS listing and provide a MOS plate as this allows the optic to sit lower and you can use standard height suppressor sights instead of a super tall set.

• Front Alignment/Support posts are only cut on full sized supported optics on our list. If you plan to send a large optic not on our list, then please reach out first. Supports pegs may be cut but due to wide variety of optics we won’t guarantee pegs will be cut.

• We recommend you review current samples of the colors we provide. These will be the exact colors you can select during checkout. Those samples can be found here>>> COLOR SAMPLES <<<

• Optic and screws are required at the time of work. If you are using an optic not on the supported list, you must reach out to us and ask if it can be done. If you ship an optic model and we need to cancel an order because we don’t offer it, then that will be cancelled per our policy

• All options must be selected at Yes/No to add to cart