No slide, Optic or iron sights are included with this service order. NCEngravers will not be responsible for sight damage during disassembly/reassembly. FN sights are tight and can sometimes be damaged during the removal/reinstall process. If we damage the sight(s) they will be bagged and not reinstalled. We will not replace or reimburse for these damaged sights as this is a common problem during the removal/reinstall process.

• Single Color Cerakote is required with this service and black is free

• When adding an optic to this model slide the optic cut is located between the barrel and rear sight. Keeping the rear sight.

• Factory iron sights will not work as the rear sight will be in rear optic socket. Suppressor Height sights will be required with an optic cut, we recommend Trijicon 600942.

• This service includes the disassemble and reassembly of your slide.

• If you are wanting to use an optic and replace the iron sights with standard height sights, we recommend a micro dot optic like the Holosun 407k.

• We recommend you review current samples of the colors we provide. These will be the exact colors you can select during checkout. Those samples can be found here>>> COLOR SAMPLES <<<

• Optic and screws are required at the time of work. If you are using an optic not on the supported list, you must reach out to us and ask if it can be done. If you ship an optic model and we need to cancel an order because we don’t offer it, then that will be cancelled per our policy.

• If you plan to do an optic cut we would recommend you watch this to better understand our optic cut service > > > Video < < <

All options must be selected to generate a total cost